Open files in Design Space. These are linked above for you so you do not have to create your own unless you want to.

Select "make it" in Design Space.

Choose the 'mirror' option to ensure proper printing.

Click 'continue' to set the mat for printing.

Cut the proper needed amount of vinyl for the design. You can do this using the portable trimmer, or scissors if you don't have one.

Place the vinyl on the Cricut mat.  The standard one at a minimum because the vinyl is fairly thick. The vinyl needs to be put on the mat face down (shiny side down).  Otherwise, your design won’t come out as intended.

Once the machine has completed cutting, release the mat, peel the vinyl from the mat, and start weeding your design using your weeding tools.

Warm up the Easy Press.

Place the Easy Press mat on a flat surface and place the pillow cover on top of it.  Then put the Easy Press on the pillow cover for a few seconds (about 5) to flatten and iron out the material before transferring the vinyl.

Place the design on the desired spot of the pillow.

Place the Easy Press on top of the design and press the start button so that it can count down. Because of the size of the design, if you have the 9 x 9 Easy Press like me, you will need to heat it in two separate sections. Making sure not to overlap.

Flip over the pillow cover and do the back of it for 15 seconds.  Broken up into to 2 sections just like on the front.

Let it cool for a few seconds and then peel back the plastic.

Stuff with the pillow inserts and enjoy your new beautiful pillows!